Sale!

AR-15 5.56 Custom Battle Worn FDE Upper Receiver

(1 customer review)

$799.95 $649.95

Usually it’s the uniform, clean lines and sharp look that everyone loves about the AR-15, but there’s something nostalgic about the weathered, rugged look of a rifle that has been to hell and back in the hands of a warrior. We take our AR15 5.56 Custom Battle Worn FDE Upper Receiver and put that patina on it so you don’t have to.. (Hopefully things don’t get rough enough state side to get that look naturally).. The important thing is your AR looks great and shoots straight (like 1 MOA at 100 yards!) and that’s what you’ll get from Veriforce Tactical.

Description

 FDE Cerakote Upper Set 

16″ Nitride 1:8 twist 5.56 barrel

Phantom Twist Flash Hider 

Custom “Battle Worn” Cerakote Finish

Our billet upper is made locally in Phoenix, in our facility. We start off from a solid block of 6061 aluminum and CNC it down to spec.  Billet is much harder and more consistent than forged. Forged has a tendency to crack and loosen through wear and tear over time, while billet will last 5x longer than a forged upper.  We now include all of our uppers with super durable billet.  We Type 3 hard coat anodize our aluminum to make it almost has hard as steel.

Our 5.56 (also shoots .223) 16” nitride barrels are 4150 Chrome Moly Vanadium (ChMV). Chrome, molybdenum, and vanadium are impurities added to the barrels, that react positively with the nitriding process with less imperfections and a smoother finish.  By not lining our barrels with Chrome, we can keep our smooth bore intact as we do the Nitriding process.  The result is a more accurate barrel.  Our barrels should give you at least a 1” grouping at 100yards.  Most of our barrels shoot Sub-MOA, which means under 1” even with ball ammo.  The average for this barrel is 1/2” grouping at 100 yards.  This barrel is good for 15,000 rounds before you will see a drop in accuracy. A 1:8 twist is what we find is the most versatile for the common grain bullets. Lastly, we use Nickel Boron on our barrel extension for the utmost smoothness and durability since this is a high wear and tear piece.  

This handguard is made with 6061 aluminum extrusion that we CNC to the meet our strict standards with top quality tooling.  The top rail is Mil-spec, as are the M-LOK slots.  This is a total length of 15” that leaves about an inch of barrel (including the threads).  We now use steel barrel nuts that can take greater torque specs while not adding too much weight.  We pride ourselves on quality and safety, so our 15” handguards allow you to properly grip your rifle (or pistol) while still leaving lots of room to mount an angle grip, flashlight, laser, and a variety of accessories.

Our Barrel nuts are cut from bar stock carpenter 4140 steel and milled out, giving you a better than mil-spec hold for your barrel extension.  We torque our barrel nuts 40-80 lbs onto our uppers, giving no chance of loosening while you shoot.

NOTE- These are custom done and may have small differences.

UPPER RECEIVER

  • US Made In Scottsdale, Arizona
  • .223 / 5.56 Cal
  • T6 6061 Billet
  • 1913 Picatinny Rail Flat Top
  • Manufactured From Solid Block Of Billet Aluminum
  • M4 Feed Ramp
  • Cerakote Battle worn Flat Dark Earth
  • Will Match Up With Any Brand AR-15 Lower Receiver
  • Accepts Mil-Spec Ejection Port Door Kit And Forward Assist Kit (Not Included)
  • Slim Profile Shell Deflector

HAND GUARD

  • US Made
  • Cerakote Battle Worn Flat Dark Earth
  • T6 Aluminum Body
  • Ultra Lightweight
  • Proprietary Lightweight Aluminum Barrel Nut Included
  • Total Weight Including Barrel Nut Is 8.8 oz
  • M-LOK Slots On 4 Sides of Handguard (Top, Bottom, Left & Right Sides)
  • M-LOK Slots On Top Rail Allow For Multiple Optic / Accessory Positioning
  • Triangle / Diamond Skeletonized Cuts Throughout Handguard to Reduce Weight
  • Rail System Slides Over Barrel Nut , And Is Locked Up Against Receiver With 6 Screws
  • Tight Fit Up Against Receiver, Which Allows For A Monolithic Top Rail
  • 15″ Length
  • Internal Diameter: 1.34″

BARREL

  • 16″ QPQ Melonite (Nitride) ChMV (chrome moly vanadium)
  • Midlength gas system
  • Nitride gas block
  • 1:8 Twist
  • AR-A1 Twist Flash Hider

Built By Veriforce Tactical Limited lifetime warranty Head space verified BCG& CHARGING HANDLE NOT INCLUDED ($130) extra

Additional information

Weight40 oz
Country of Origin

Gas System

Muzzle Devices

Barrel Length

Caliber

Handguard Length

Barrel Twist

Color

Handguard Attachment System

1 review for AR-15 5.56 Custom Battle Worn FDE Upper Receiver

  1. George Aguilar

    Great quality upper. This thing is da bomb.

Add a review

Your email address will not be published. Required fields are marked *

You may also like…

Menu