Home » AR-15 5.56 Custom Upper “Oath Keeper”

AR-15 5.56 Custom Upper “Oath Keeper”

The AR15 5.56 Custom Upper “Oath Keeper” is a special set up with the irresistible aesthetic of an integrally suppressed rifle. Sadly the “suppressor” on this rifle isn’t real so you’ll need your ear plugs, however, the flash hider does work really well! The shroud slips over about 4 inches of the barrel inside the slim 1.32″ inner diameter handguard and leaves the flash hider portion extending past the end of the barrel giving you the function and cool factor you deserve. You keep your oath to defend the 2nd Amendment and we’ll keep ours that this upper will shoot 1 MOA at 100 yards with factory ball ammo!

3 customer reviews

Original price was: $589.99.Current price is: $449.99.

In stock

Category: AR-15, AR-15 5.56 .223 Upper Receivers, AR-15 Complete Upper Receivers, AR-15 Uppers, AR-15 Uppers, Specials
Tags: 16" Barrel, 5.56, Anodized, AR-15, Black, Fake Suppressor, KeyMod, Muzzle Compensator

This handguard is made with 6061 aluminum extrusion that we CNC to the meet our strict standards with top quality tooling.  The top rail is Mil-spec, as are the M-LOK slots.  This is a total length of 15” that leaves about 2 inches of flash hider barrel extension.  We now use steel barrel nuts that can take greater torque specs while not adding too much weight.  We pride ourselves on quality and safety, so our 15 handguards allow you to properly grip your rifle (or pistol) while still leaving lots of room to mount an angle grip, flashlight, laser, and a variety of accessories.

Our Barrel nuts are cut from bar stock carpenter 4140 steel and milled out, giving you a better than mil-spec hold for your barrel extension.  We torque our barrel nuts 40-80 lbs onto our uppers, giving no chance of loosening while you shoot.

Our billet upper is made locally in Phoenix, in our facility. We start off from a solid block of 6061 aluminum and CNC it down to spec.  Billet is much harder and more consistent than forged. Forged has a tendency to crack and loosen through wear and tear over time, while billet will last 5x longer than a forged upper.  We now include all of our uppers with super durable billet.  We Type 3 hard coat anodize our aluminum to make it almost has hard as steel.

Our 5.56 (also shoots .223) 16” nitride barrels are 4150 Chrome Moly Vanadium (ChMV). Chrome, molybdenum, and vanadium are impurities added to the barrels, that react positively with the nitriding process with less imperfections and a smoother finish.  By not lining our barrels with Chrome, we can keep our smooth bore intact as we do the Nitriding process.  The result is a more accurate barrel.  Our barrels should give you at least a 1” grouping at 100yards.  Most of our barrels shoot Sub-MOA, which means under 1” even with ball ammo.  The average for this barrel is 1/2” grouping at 100 yards.  This barrel is good for 15,000 rounds before you will see a drop in accuracy. A 1:8 twist is what we find is the most versatile for the common grain bullets. Lastly, we use Nickel Boron on our barrel extension for the utmost smoothness and durability since this is a high wear and tear piece.

  • Precision Billet Mil-Spec Upper
  • 5 Sided Keymod At The 90, 135, 180, 225, 270 Degree Marks
  • Custom Slip Over Shroud Muzzle Brake
  • 3 Lbs. Total Weight
  • 15″ Length M-LOK  Universal Free Float USA Made**
  • 16″ 1:8 Twist 5.56 Caliber QPQ Melonite (Nitride) Chmv (Chrome Moly Vanadium)
  • Assembled And Made By Veriforce Tactical
  • BCG And Charging Handle NOT Included
  • Handguard Is 1.32″ Inner Diameter
  • Mid-Length Gas System With Low Profile Gas Block
  • Headspace Tested
  • **pictured with KeyMod now comes in M-LOK Slots!!
Weight: 64 oz
Country of Origin:
Material: ,
Gas System:
Barrel Length:
Handguard Length:
Barrel Twist:
Handguard Attachment System:

3 reviews for AR-15 5.56 Custom Upper “Oath Keeper”

  1. Steve Irwin

    Great quality and customer service. Had a few questions, gave them a ring and they promptly answered all the questions I had. Thank you!

  2. Tony Poley (verified owner)

    This upper is outstanding !! I LOVE the look of the handguard, and the “USA” machined into the side of it is icing on the cake. When I finally got around to shoot it (still working on a dedicated lower for it) with a SAA lower I have, the upper performed flawlessly. It shoots better than I do, with groups practically touching at 80 yds, and all the brass sitting in a nice pile at the 3-4:00 position. Fit and finish is excellent on this beautifully made complete upper. I have definitely found my new go to place for AR parts and uppers !! Thank you Veriforce Tactical for providing me with a fine USA made product that I can be proud to show to all my shooting buddies and friends !! I can’t wait to finish my complete build and really get in some range time with this Oath Keeper upper.

  3. Donald (verified owner)

    This upper is very accurate . Looks very good and is great upper.

Add a review

Your email address will not be published. Required fields are marked *

Associated products

Similar products