Anodized Purple Upper Set
16″ Nitride 1:8 twist 5.56 barrel
Fake Suppressor Flash Hider
Buffer Tube and Grip in Anodized Purple
Our skeleton grip is a 6061 billet block that we mill down to size, there is no better deal online with aluminum grips then our AR-15 skeleton grips. It has a bead blast purple anodized finish that looks amazing and feels great. We spare no detail!
We mil out a solid bar block for our mil-spec buffer tube, we do not cut corners by buying hollow bar stock and capping the end like most manufactures do. That gives a better more SAFE fixed length stock tube that you can trust.
Our billet upper is made locally in Phoenix, in our facility. We start off from a solid block of 6061 aluminum and CNC it down to spec. Billet is much harder and more consistent than forged. Forged has a tendency to crack and loosen through wear and tear over time, while billet will last 5x longer than a forged upper. We now include all of our uppers with super durable billet. We Type 3 hard coat anodize our aluminum to make it almost has hard as steel.
Our 5.56 (also shoots .223) 16” nitride barrels are 4150 Chrome Moly Vanadium (ChMV). Chrome, molybdenum, and vanadium are impurities added to the barrels, that react positively with the nitriding process with less imperfections and a smoother finish. By not lining our barrels with Chrome, we can keep our smooth bore intact as we do the Nitriding process. The result is a more accurate barrel. Our barrels should give you at least a 1” grouping at 100yards. Most of our barrels shoot Sub-MOA, which means under 1” even with ball ammo. The average for this barrel is 1/2” grouping at 100 yards. This barrel is good for 15,000 rounds before you will see a drop in accuracy. A 1:8 twist is what we find is the most versatile for the common grain bullets. Lastly, we use Nickel Boron on our barrel extension for the utmost smoothness and durability since this is a high wear and tear piece.
This handguard is made with 6061 aluminum extrusion that we CNC to the meet our strict standards with top quality tooling. The top rail is Mil-spec, as are the M-LOK slots. This is a total length of 12” that leaves several inches of barrel (including the threads). We now use steel barrel nuts that can take greater torque specs while not adding too much weight. We pride ourselves on quality and safety, so our 12” handguards allow you to properly grip your rifle (or pistol) while still leaving lots of room to mount an angle grip, flashlight, laser, and a variety of accessories.
Our Barrel nuts are cut from bar stock carpenter 4140 steel and milled out, giving you a better than mil-spec hold for your barrel extension. We torque our barrel nuts 40-80 lbs onto our uppers, giving no chance of loosening while you shoot.
- Scottsdale AZ made Billet Upper Receiver Anodized Purple
- T6 6061 Billet
- 1913 Picatinny Rail Flat Top
- M4 Feed Ramps
- Forward assist and Dust cover
- 16″ Nitride Match grade barrel
- CrMoV (chrome moly vanadium)
- Mid length Gas System
- Nitride Gas Block
- 1:8 Twist
- Anodized Purple Fake suppressor shroud with muzzle brake (SKU – 1326-MB-PURPLE)
- Scottsdale AZ made
- T6 Aluminum Frame
- Proprietary barrel nut with 6 Locking Screws
- 12″ Length
- I.D. 1.34
- Made in Scottsdale AZ
- Ultra Light Skeletonized
- Rubber butt pad
- solid one piece aluminum
- Comes with Castle nut, end plate, and buffer spring combo
- (SKU – ARSTK-AIR)
- T6066 aluminum
- 3.1 oz total weight
- Type 2 Class II Anodized Purple
NOT INCLUDED BCG & CHARGING HANDLE AND LOWER RECEIVER