Join the waitlist to be emailed when this product becomes available

Sale!

Home » Store » AR-15 » AR-15 Uppers » AR-15 Complete Upper Receivers » AR-15 5.56 Custom “MERICA” Upper Receiver

AR-15 5.56 Custom “MERICA” Upper Receiver

1 customer review
$799.95 $649.95

Out of stock

SKU: UP-MERICA
UPC: 617201303320
Category: 5.56 Upper Receivers, AR-15, AR-15 5.56 .223 Upper Receivers, AR-15 Complete Upper Receivers, AR-15 Uppers, Blue AR-15 Parts and Accessories, Red AR-15 Parts and Accessories, Specials
Tags: 16" Barrel, 5.56, AR-15, Arctic White, Blue, Cerakote, KeyMod, Muzzle Devices, Red

Our billet upper is made locally in Phoenix, in our facility. We start off from a solid block of 6061 aluminum and CNC it down to spec.  Billet is much harder and more consistent than forged. Forged has a tendency to crack and loosen through wear and tear over time, while billet will last 5x longer than a forged upper.  We now include all of our uppers with super durable billet.  We Type 3 hard coat anodize our aluminum to make it almost has hard as steel.

Our 5.56 (also shoots .223) 16” nitride barrels are 4150 Chrome Moly Vanadium (ChMV). Chrome, molybdenum, and vanadium are impurities added to the barrels, that react positively with the nitriding process with less imperfections and a smoother finish.  By not lining our barrels with Chrome, we can keep our smooth bore intact as we do the Nitriding process.  The result is a more accurate barrel.  Our barrels should give you at least a 1” grouping at 100yards.  Most of our barrels shoot Sub-MOA, which means under 1” even with ball ammo.  The average for this barrel is 1/2” grouping at 100 yards.  This barrel is good for 15,000 rounds before you will see a drop in accuracy. A 1:8 twist is what we find is the most versatile for the common grain bullets. Lastly, we use Nickel Boron on our barrel extension for the utmost smoothness and durability since this is a high wear and tear piece.

This handguard is made with 6061 aluminum extrusion that we CNC to the meet our strict standards with top quality tooling.  The top rail is Mil-spec, as are the M-LOK slots.  This is a total length of 15” that leaves about an inch of barrel (including the threads).  We now use steel barrel nuts that can take greater torque specs while not adding too much weight.  We pride ourselves on quality and safety, so our 15” handguards allow you to properly grip your rifle (or pistol) while still leaving lots of room to mount an angle grip, flashlight, laser, and a variety of accessories.

Our Barrel nuts are cut from bar stock carpenter 4140 steel and milled out, giving you a better than mil-spec hold for your barrel extension.  We torque our barrel nuts 40-80 lbs onto our uppers, giving no chance of loosening while you shoot.

UPPER RECEIVER

  • US Made In Scottsdale, Arizona
  • 1913 Picatinny Rail Flat Top
  • Cerakote Battle Worn Flat Dark Earth
  • Slim Profile Shell Deflector
  • .223 / 5.56 Cal
  • Manufactured From Solid Block Of Billet Aluminum
  • Will Match Up With Any Brand AR-15 Lower Receiver
  • T6 6061 Billet
  • M4 Feed Ramp
  • Accepts Mil-Spec Ejection Port Door Kit And Forward Assist Kit (Not Included)

HANDGUARD

  • US Made
  • Ultra Lightweight
  • M-LOK Slots On 4 Sides of Handguard (Top, Bottom, Left & Right Sides)
  • Rail System Slides Over Barrel Nut And Is Locked Up Against Receiver With 6 Screws
  • Internal Diameter: 1.34″
  • Cerakote Battle Worn Flat Dark Earth
  • Proprietary Lightweight Aluminum Barrel Nut Included
  • M-LOK Slots On Top Rail Allow For Multiple Optic / Accessory Positioning
  • Tight Fit Up Against Receiver, Which Allows For A Monolithic Top Rail
  • T6 Aluminum Body
  • Total Weight Including Barrel Nut Is 8.8 oz
  • Triangle / Diamond Skeletonized Cuts Throughout Handguard to Reduce Weight
  • 15″ Length

BARREL

  • 16″ QPQ Melonite (Nitride) ChMV (Chrome Moly Vanadium)
  • 1:8 Twist
  • Midlength gas system
  • Veriforce Barrel SUB-MOA at 100 Yards
  • Nitride Gas Block
  • 3 Prong A3 Flash Hider

Associated products

Similar products

Menu